PC: Re: Penn Central Digest V8 #11

["Dale DeVene" <devene@xxxxxxxxxxx>]

Sorry, I am modeling in HO Scale.  I can never see, to remember that small 
but very important detail!

I will check with a PRR friend and see if he might be able to help me oout.

Thank you for the information!

Regards,

Dale DeVene


----- Original Message ----- 
From: "Penn Central Digest" <owner-penn-central@xxxxxxxxxxxxx>
To: <penn-central-digest@xxxxxxxxxxxxx>
Sent: Wednesday, July 23, 2008 5:10 AM
Subject: Penn Central Digest V8 #11


> Penn Central Digest      Wednesday, July 23 2008      Volume 08 : Number 
> 011
>
>
>
> Subjects in this issue:
>     PC: Decal help for U30C's
>     RE: PC: Decal help for U30C's
>     Re: PC: Decal help for U30C's
>
> ----------------------------------------------------------------------
>
> Date: Sun, 20 Jul 2008 22:45:58 -0400
> From: "Dale DeVene" <devene@xxxxxxxxxxx>
> Subject: PC: Decal help for U30C's
>
> I am getting ready to letter my Atlas PC U30C with correct lettering =
> from Microscale, but I'm missing the cab numbers.  Does anyone make the =
> smaller style of numbers on these units?  If so, where do I get them? =20
>
> I am going to do it as the 6549.  Below is a link for reference.
>
> http://www.rr-fallenflags.org/pc/pc6549s.jpg =20
>
> Thank you for your time.
>
> Regards,
>
> Dale DeVene
>
> ------------------------------
>
> Date: Mon, 21 Jul 2008 14:35:41 +0000
> From: Steffan Forbes <steffanf@xxxxxxxxxxx>
> Subject: RE: PC: Decal help for U30C's
>
> Well=2C Dale.  First off=2C that engine is a U-33C.  Those narrow-font 
> numb=
> ers (a rare ex-PRR style) were only used on a handfull of PC units. 
> Micros=
> cale only makes them in yellow on a PRR set.  However=2C you didn't say 
> wha=
> t scale you model.  I have some made up in white=2C but I model only 
> N-Scal=
> e...
> =20
> - -Gregg B.
> =20
>
>
>
> Date: Sun=2C 20 Jul 2008 22:45:58 -0400From: devene@xxxxxxxxxxxxxxxxxx: 
> PC:=
> Decal help for U30C'sTo: penn-central@xxxxxxxxxxxxx
>
>
>
> I am getting ready to letter my Atlas PC U30C with correct lettering from 
> M=
> icroscale=2C but I'm missing the cab numbers.  Does anyone make the 
> smaller=
> style of numbers on these units?  If so=2C where do I get them? =20
> =20
> I am going to do it as the 6549.  Below is a link for reference.
> =20
> http://www.rr-fallenflags.org/pc/pc6549s.jpg =20
> =20
> Thank you for your time.
> =20
> Regards=2C
> =20
> Dale DeVene
> _________________________________________________________________
> Use video conversation to talk face-to-face with Windows Live Messenger.
> http://www.windowslive.com/messenger/connect_your_way.html?ocid=3DTXT_TAGLM=
> _WL_Refresh_messenger_video_072008=
>
> ------------------------------
>
> Date: Tue, 22 Jul 2008 20:36:23 -0400
> From: heavyelectric@xxxxxxxxxxxx
> Subject: Re: PC: Decal help for U30C's
>
> A fellow made a large sheet that included those narrow PRR style numbers 5 
> or so years ago, printed to order and strictly a limited run.? Since there 
> are some phase issues with the Atlas U33C model anyway I kept the factory 
> numbers.
>
> Jim Homoki
> Not a PCRRHS member?
> Go to www.PCRRHS.org
>
> - -----Original Message-----
> From: Dale DeVene <devene@xxxxxxxxxxx>
> To: penn-central@xxxxxxxxxxxxx
> Sent: Sun, 20 Jul 2008 10:45 pm
> Subject: PC: Decal help for U30C's
>
>
>
> I am getting ready to letter my Atlas PC U30C with correct lettering from 
> Microscale, but I'm missing the cab numbers.? Does anyone make the smaller 
> style of numbers on these units?? If so, where do I get them??
>
> ?
>
> I am going to do it as the 6549.? Below is a link for reference.
>
> ?
>
> http://www.rr-fallenflags.org/pc/pc6549s.jpg?
>
> ?
>
> Thank you for your time.
>
> ?
>
> Regards,
>
> ?
>
> Dale DeVene
>
> ------------------------------
>
> End of Penn Central Digest V8 #11
> *********************************