PC: RE: Fw: #9951

["Randy Mower" <rsmower@xxxxxxxxxxxxx>]

There's a copy of a photo I took of 9951 on my web site at

http://www.trainweb.org/randysrr/    go to the Conrail Section and look under RS3m's

 

Randy

-----Original Message-----
From: owner-penn-central -AT- prozac.eeap.cwru.edu [mailto:owner-penn-central -AT- prozac.eeap.cwru.edu]On Behalf Of Gerhard A. Stuebben
Sent: Tuesday, July 11, 2000 12:10 PM
To: penn-central -AT- smellycat.com
Subject: PC: Fw: #9951

The photo of #9951 is now posted at:

 

http://gelwood.railfan.net/other/pc/pc9951s.jpg

 

-----Original Message-----
From: Gerhard A. Stuebben <stuebben@flash.net>
To: penn-central@smellycat.com <penn-central@smellycat.com>
Date: Sunday, July 09, 2000 3:24 PM
Subject: PC: Re: #9951

There is an RS-3m (#5230) with low nose on page 117 of Yanosey's Penn Central Power book.

 

Also, I have a photo of 9951 taken from the short hood end that I can post if it would be helpful.

 

If my memory is correct, PC Railroader magazine ran an article on Mingo Jct., but I don't know what issue it was.

 

Gary Stuebben

Dayton, OH

-----Original Message-----
From: Craig Levine <craiglevine@freewwweb.com>
To: penn central <penn-central@smellycat.com>
Cc: penn central <penn-central@smellycat.com>
Date: Sunday, July 09, 2000 2:57 PM
Subject: PC: #9951

I want to model RS 3m # 9951 with the low short hood. Does anyone have or know of a source of photos to do this project?

Also is there a book or magazine articles on the PC in and around Mingo Junction, and the steel industry?